HOP Five 450, HOP Five 550, HOP Five 650,
HOP Five 750, HOP Five 900, HOP Five 1000

Reliable stability with compact body

It offers a space saving design with integration of robot body and control mechanism including transformer and control circuit board. It is applicable even for high-speed moulding with stable take-out operation thanks to its robust body.

Efficient design

It also offers efficient operation as its design enables operators to do all of the main adjusting operations at the operator side of moulding machines.

Sophisticated appearance

It adopts a housing cover painted Yushin corporate blue, color-coded piping and user friendly shape composed of curved surfaces and lines.

Product Data			Click on icons below for an explanation of terms
		Clamping Force	280 - 650 ton
		Swing Angle	50° - 90°
		Adjustable Stroke	Yes
		Adjustable Chuck Waiting Position	Yes
		Guide Section	Yushin Linear Rail
		Controller	GII-type

• Equipped with ample functions in its compact body.
  
  
• The robust construction supports the stable take-out operation.
  
  
• Equipped as standard with highly-functional GII-type controller.
  
  
• Multilingual display selection (optional).
  
  
• This comes standard with a GII-type controller, which is available with an optional multilingual display function oriented the international market.

Standard Specification

Dimensions

Option List

Option	Explanation
X option	X option When moulded parts are released onto a conveyor or chute, a wrist rotates 90 in the to release parts carefully without scratching them.
Conveyor signal link	Operation can be interlocked to a conveyor by connecting an optional metal connector, enabling moulded parts to be stocked.
Defect reject circuit	When a defect signal is received, defective parts are released at a separate location from good parts.
Special color	The customer can specify a special color for the robot and the control box, etc.
Ejector link	The timing of the ejector operation and part gripping operation is synchronized.
External Part removal detection	After runners have been extracted, they can be detected by a limit switch.
Air blow circuit	When a runner is gripped and the arm ascends, fragments from the moulded parts that are adhering to the mould are blown away using air.
Grip circuit pressure regulator	To prevent deformation of the moulded products, a pressure reducing valve is used.
Vacuum blow back circuit	If parts are difficult to release from vacuum cups, air blows through this valve to ensure safe release of the parts.
Swing limit standby	If the robot will interfere with an object such as a rack mould when the mould closes, the robot can be set to stand by at the swing out limit.
Automatic injection signal	The robot can use the automatic injection signal output from the moulding machine as a condition to begin extracting. This initiates automatic operation only when parts have been moulded.
Automatic injection signal	Automatic injection signal The take-out robot uses the automatic injection signal input of the moulding machine as the condition to begin extracting. Using this signal makes it possible to initiate the extracting operation only when products have actually been moulded.
Lead Through Teaching	It is a software allowing operators to change motion program such as addition of point and timer and speed setting by themselves.
Three (3) position safety switch on controller	Valve operation is possible only while the operator is holding this switch in the centre position.
High speed specifications	This is the high speed operation mode.

Click here to return to the top of the page