ACS-KM.Decker

Product Data		Click on icons below for an explanation of terms
	Clamping Force	30 - 150ton

	Servo	Servo Driven Traverse Type Robot Supported

	Air	Air Driven Traverse Type Robot Supported

	Y-vic	Possible Link with Y-vic

	Main Usage, Applicable Molded Products	General Moulded Products

	Stocking Type	Vertical 2-stage Type

	Containers

Yushin pallets used - Any size pallet (S, M, L, or LL) may be used. (Hi pallets and Mini pallets and Injection Fine-pallets cannot be used on the same machine).
Plastics chain belt used - A plastics chain belt is used in the pallet transport unit. This keeps pallets in place in the transport unit and helps eliminate dust and contamination in the plant.
Less space required / large-capacity stocking - A pallet stacking system is used, enabling long-term automatic operation that requires a minimum of space.
Operated with air-driven robots - A pallet index mechanism allows parts to be palletized using air-driven take-out robots (with one servo-driven traverse axis). The stocking position can be programmed to match the height at which the products are released by the press mounted robot.

Power Voltage		AC200V 50/60Hz
Power Consumption		3 phase AC200V 5A
Working pressure		0.5MPa
Maximum Allowable Pressure		0.8MPa
Air Consumption		0.6 Litre (Normal) / Cycle
Driving Method		Air Cylinder / Induction Motor / DC Brushless Motor / Inverter motor
Control Method		Sequence Control
Applicable Pallets		Hi Pallets S, M, L, LL / Mini Pallets S, M, L, Injection-Hi Pallets S, M, L, LL Injection-Fine Pallets S
No. of Pallets Stocked (Mini Pallets Do Not Come in LL or Sizes)	S	17 Pallets x 3 stacks (20 pallets x 3stacks) < 19 pallets x 3 stacks >
	M	11 pallets x 3 stacks (12 pallets x 3stacks) < 10 pallets x 3 stacks >
	L	7 pallets x 3 stacks (8 pallets x 3stacks) < 7 pallets x 3 stacks >
	LL	4 pallets x 3stacks
Pallet Changing Cycle Time		10 sec
Main Unit Weight		430kg(400kg) < 400kg >