SXA-300 III/V

Product Data		Click on icons below for an explanation of terms
	Clamping Force	180 - 450 ton

	Number of Servo Axes	3 / 5 Axes

	Take-out Time*	0.64sec

	Linear Guide	Yushin Linear Rail

	Controller	E-touch Web

*Based on dry-cycle measurement conditions as specified by Yushin.

Side entry type for clean moulding environment. This robot contributes to extraction of moulded products which requires clean moulding environment such as optical parts, medical equipment and food containers,etc. Further more this side-entry robot is good for low-ceiling factories such as clean room, free from dust as no driving mechanism is located above mould.
Hi-power servo motors. Special high-power servo motors are used to optimize acceleration, deceleration and overall speeds.
3/5-axis NC servo motor robot. In addition to the servo motors on the traverse and kick axis, the robot incorporates servo motor on the vertical axis to accommodate down stream operations such as palletizing and for quick change over to new jobs. 3-axis SXA-300III for 2 plates and 5-axis SXA-300V for 3 plates are lined up.
E-touch Web controller equipped. The E-touch Web controller is the same as supplied for our popular top entry servo robots for ease of use and familiarity on the shop floor personnel.

Model		SXA-300 III	SXA-300V
Maximum Power Consumption		3-phase AC200V 13.7A
Traverse Stroke (mm)	Product Side	1600
	Runner Side	-	1050
Kick Stroke (mm)	Product Side	675
	Runner Side	565	565
Vertical Stroke (mm)		325
Air consumption Litre(Normal) / Cycle		20
Maximum Payload (Including End-of-Arm Tool)		Less than 8 kg

*1 : The payload varies with the robot speed setting.

Option	Explanation
Color specification	We can paint the sheet metal of body covers, a control box, and an operation box etc. with the color specified by our customers.
Traverse stroke extension	Product side 400mm extendable, Runner side 400mm extendable